D-Link DNS-343 User Manual
21
Time and Date Page
The Time and Date of the DNS-343 can be set manually or be configured automatically
using an NTP Server.
Choose the Time Zone of where you are located
from the drop-down menu.
Tick the Enable NTP Server check box
to enable NTP. Network Time Protocol (NTP)
synchronizes the DNS-343 with an Internet
time server.
Type the URL of the NTP Server in the NTP
Server check box or use the drop-down menu
to choose one of the two time servers that D-Link
provides for your convenience.
To set the date and time manually, ensure
that the Enable NTP Server is deselected and
select the Date and Time using the drop-down
menus.
Time Zone:
NTP Server:
Set the Date and
Time Manually:
To Next Page
Loading...
Need help?
General
