D-Link DNS-343 User Manual
10
Installation
1. Access the drive bays by sliding the faceplate up until it unlatches from the
device.
This section provides unpacking and installation information for the DNS-343. Open the shipping carton for the DNS-343 and carefully unpack its contents. If this is the first
time using the DNS-343 or if a new hard disk is installed, use the Easy Search utility located on the Installation CD and follow the instructions for setting up, configuring and
formatting the new drive.
Hardware Setup
2. Once the faceplate is unlatched, pull it off the device, exposing the drive
bays.
To Next Page
Need help?
General
