xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
90
Multicast IP
Address List
A multicast IP address list can be entered.
Source IP Address
A source IP Address can be specified.
The following table is used to set the Destination settings, to view this window click the corresponding View button in the IP
Multicast VLAN Replication Entries table as shown below:
This table is used to configure the destination, so when traffic matches an IP Multicast VLAN Replication entry, it will be
replicated based on the destination settings. Multiple destination entries can be defined and each destination entry specifies the
VLAN and the outgoing port on which the traffic will be replicated. The outgoing port must be a member port of the VLAN,
whether the egress packet is tagged or untagged based on the VLAN settings.
Figure 2 - 100 IP Multicast VLAN Replication Destination Edit window
The following fields may be set:
Parameter Description
Entry Name
The name of the previously created IP Multicast VLAN Replication entry will be displayed.
VID / VLAN Name
Select VID and enter an outgoing VLAN ID. Select VLAN Name and enter an outgoing VLAN
Name.
Port List(e.g..:1,6-9)
Enter the outgoing list of ports to be included in the destination settings.
Action
Use the drop-down menu to Add or Delete the destination.
To Next Page
Loading...
Need help?
General