D-Link xStack User Manual

xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
277
SSH User Authentication Mode
The following windows are used to configure parameters for users attempting to access the Switch through SSH.
To view this window, click Security > SSH > SSH User Authentication Mode, as shown below:
Figure 6 - 62 SSH User Authentication Mode window
In the example above, the User Account “RG” has been previously set using the User Accounts window in the Administration
folder. A User Account must be set in order to set the parameters for the SSH user. To configure the parameters for a SSH user,
click on the hyperlinked User Name in the Current Accounts window, which will reveal the following window to configure.
NOTE: To set the SSH
User Authentication
parameters on the
Switch, a User
Account must be
previously configured.
Figure 6 - 63 User Account Add Table window
Once a User Account has been configured, return to the SSH User Authentication window, which now displays the newly created
account, as shown here.
Figure 6 - 64 SSH User Authentication Mode window
To configure the SSH settings for this user, click its hyperlinked User Name which will display the following window to
configure:
Figure 6 - 65 SSH User Authentication Mode – Edit window
The user may set the following parameters:

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English