xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
316
NOTE: To configure MLD snooping for the xStack
®
DGS-3400 Series switch, go to the L2
Features folder and select MLD Snooping. Configuration and other information
concerning MLD snooping may be found in Section 7 of this manual under MLD
Snooping.
Switch Logs
The Web manager allows the Switch's history log, as compiled by the Switch's management agent, to be viewed.
To view this window, click Monitoring > Switch Log, as shown below:
Figure 7 - 32 Switch History Logs window
The Switch can record event information in its own logs, to designated SNMP trap receiving stations, and to the PC connected to
the console manager. Click Next to go to the next page of the Switch History Log. Clicking Clear will allow the user to clear the
Switch History Log.
The information in the table is categorized as:
Parameter Description
Type
Choose the type of log to view. There are two choices:
Regular Log – Choose this option to view regular switch log entries, such as logins or firmware
transfers.
Attack Log – Choose this option to view attack log files, such as spoofing attacks.
Unit
Choose the Unit ID of the switch in the switch stack for which to view the switch log.
Sequence
A counter incremented whenever an entry to the Switch's history log is made. The table displays
the last entry (highest sequence number) first.
Time
Displays the time in days, hours, and minutes since the Switch was last restarted.
Log Text
Displays text describing the event that triggered the history log entry.
To Next Page
Loading...
Need help?
General