xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
120
Figure 3 - 19 Protocol VLAN Port Settings window
The following fields may be configured:
Parameter Description
Port List
Use this parameter to assign ports to a Protocol VLAN Group or remove them from the Protocol
VLAN Group. Ticking the Select All Ports check box will configure this Protocol VLAN Group to
all ports on the switch.
Action
Use the pull-down menu to add or delete the following Group ID to or from the ports selected in
the previous field.
Group ID (1-16)
Enter the ID number of the Protocol VLAN Group for which to add or remove from the selected
ports. Ticking the Select All Groups check box will apply all Protocol VLAN groups to the ports
listed in the Port List field.
VLAN ID / VLAN
Name
Use this field to add a VLAN to be associated with this configuration. Select the correct radio
button if you are using a VLAN Name or a VID (VLAN ID).
Click Apply to implement changes made. The Protocol VLAN Port Table in the bottom half of the window will display correctly
configured ports to Protocol Group configurations, along with associated VLANs and priorities. Users may use the Port List
Search in the middle of the window to display configurations based on ports on the switch. Clicking the Show All Protocol VLAN
Port Table Entries link will display all Protocol VLAN Port Table entries.
To Next Page
Loading...
Need help?
General