Installer:
Ax all manuals
adjacent to the unit.
As a professional installer you have an obligation to know the
product better than the customer. This includes all safety
precautions and related items.
Prior to actual installation, thoroughly familiarize yourself
with this Instruction Manual. Pay special attention to all
safety warnings. Often during installation or repair it
is possible to place yourself in a position which is more
hazardous than when the unit is in operation.
Remember, it is your responsibility to install the product
safely and to know it well enough to be able to instruct a
customer in its safe use.
Safety is a matter of common sense...a matter of thinking
practices...follow them.
The precautions listed in this Installation Manual are
intended as supplemental to existing practices. However,
the content of this manual, the precautions listed here take
precedence.
*NOTE: Please contact your distributor or our website
manual.
ONLY PERSONNEL THAT HAVE BEEN TRAINED TO INSTALL, ADJUST,
PROPERTY
(Type FSP CATEGORY IV Direct
or Non Direct Vent Air Furnace)
(Type FSP CATÉGORIE IV Direct
These furnaces comply with requirements
embodied in the American National Standard
/ National Standard of Canada ANSI
Z21.47·CSA-2.3 Gas Fired Central Furnaces.
INSTALLATION INSTRUCTIONS
Our continuing commitment to quality products may mean a change in specications without notice.
19001 Kermier Rd., Waller, TX 77484
www.daikincomfort.com
IOD-2029A
02/2022
© 2021-2022
PRODUCT USING
HEAT EXCHANGER
To Next Page
Need help?
General
