Operating instructions
4
Daikin RoCon
Daikin Control unit
008.1543999_00 – 03/2017 – EN
1 x General safety precautions
1 General safety precautions
1.1 Particular safety instructions
WARNING!
Heating devices that have not been set up and installed correctly can impair the function of the
heating device and/or cause serious or fatal injuries to the user.
● Work on the Daikin heat generator (such as set-up, servicing, connection and initial start-up) must
only be carried out by persons who are authorised and who have successfully completed quali-
fying technical or vocational training and who have taken part in advanced training sessions
recognised by the relevant responsible authorities for the specific activity. These include, in
particular, certified heating engineers, qualified electricians and HVAC specialists who,
because of their professional training and their expert knowledge, have experience in the
professional installation and maintenance of heating systems, oil and gas installations and hot
water storage systems.
● Only operate the Daikin heat generator in perfect condition with the protective hood closed.
WARNING!
Disregarding the following safety instructions may result in serious physical injury or death.
● This equipment must only be used by children aged 8 and above and by persons with restricted
physical, sensory or mental capabilities or with a lack of experience and knowledge, if they are
under supervision or if they have been instructed in the safe use of the equipment and under-
stand the dangers arising therefrom. Children must not play with the equipment. Cleaning and
user maintenance must not be carried out by children without supervision.
● Make up the power supply in accordance with IEC 60335-1, via a separator device which exhibits
contact separation in all poles with a contact opening distance that provide full disconnection in
accordance with overvoltage category III.
● All the electrical work must only be carried out by electrically qualified experts and with consider-
ation of the local and national regulations, and the instructions in this manual.
Check that a suitable electrical circuit is being used.
Inadequate capacity of the power circuit or improperly executed connections can cause electro-
cution or fire.
To Next Page
Loading...
Need help?
General
