SiBE18-821_C RA Indoor Unit
Operation Manual 177
3.1.4 COMFORT AIRFLOW Operation
15
COMFORT AIRFLOW Operation
To start COMFORT AIRFLOW operation
Press .
To cancel COMFORT AIRFLOW operation
Press again.
COOL operation HEAT operation
NOTE
Notes on COMFORT AIRFLOW operation
The flow of air will be in the upward direction while in COOL operation and in the
downward direction while in HEAT operation, which will provide a comfortable
wind that will not come in direct contact with people.
• The flaps will return to the memory position from before COMFORT AIRFLOW
operation.
• “ ” disappears from the LCD.
• The flaps position will change, preventing air from blowing directly on the occupants of the room.
• POWERFUL operation and COMFORT AIRFLOW operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• The airflow rate will be set to Auto. If the upper and lower airflow direction is selected, the COMFORT AIRFLOW operation will be canceled.
• “ ” is displayed on the LCD.
• Airflow rate is set to Auto.
COOL/DRY: The flaps will go up.
HEAT: The flaps will go down.
To Next Page
Loading...
Need help?
General
