SiBE18-821_C RA Indoor Unit
Operation Manual 183
3.1.9 OFF TIMER Operation
21
OFF TIMER Operation
To use OFF TIMER operation
1.
Press .
• “ ” is displayed on the LCD.
• “ ” blinks.
• “ ” and day of the week disappear from the LCD.
3.
Press again.
Page 5
Display
To cancel OFF TIMER operation
Press .
NOTE
Notes on TIMER operation
NIGHT SET mode
Timer functions are useful for automatically switching the air conditioner on or off
at night or in the morning. You can also use OFF TIMER and ON TIMER in
combination.
2.
Press until the time setting reaches the
point you like.
• When TIMER is set, the present time is not displayed.
• Once you set ON/OFF TIMER, the time setting is kept in the memory. The memory is canceled when remote controller batteries are
replaced.
• When operating the unit via the ON/OFF TIMER, the actual length of operation may vary from the time entered by the user. (Maximum
approx. 10 minutes)
• When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5˚C up in COOL, 2.0˚C down in HEAT) to
prevent excessive cooling (heating) for your pleasant sleep.
• Each pressing of either button increases or decreases the time setting by 10 minutes.
Holding down either button changes the time setting rapidly.
• “ ” and setting time are displayed on the LCD.
• The multi-monitor lamp blinks twice.
The TIMER lamp periodically lights orange.
• “ ” and setting time disappear from the LCD.
• “ ” and day of the week are displayed on the LCD.
• Check that the clock is correct.
If not, set the clock to the present time.
To Next Page
Loading...
Need help?
General
