Danfoss EKE 1A User Manual

1 Introduction
The exible pre-programmed EKE superheat controller from Danfoss provides ultimate software control, allowing
you to tailor the performance of your system to your exact requirements. EKE is ideal for controlling a wide range of
commercial air conditioning and refrigeration applications, such control helps you to achieve the highest eciency
in the system reducing the operational cost by up to 20% with minimal eort. EKE is generally used where there is a
requirement for accurate control of superheat or temperature control in connection with air conditioning and
refrigeration. The superheat is regulated to the lowest possible value within a short period of time. It regulates the
superheat of the evaporator by charging optimally even when there are great variations of load resulting in
reduction of energy consumption and operational cost
Typical Applications:
• Chillers
• Processing plant / Cabinet cooling
• Cold store (air coolers)
• A/C plant / Air conditioning
• Heat pumps. Residential Heat Pump
• Transport cooling
• Stepper Motor Driver
Superheat controller, Type EKE 1A, 1B, 1C, 1D
© Danfoss | Climate Solutions | 2022.06 BC398828796060en-000101 | 4

Danfoss EKE 1A Specifications

General

Brand	Danfoss
Model	EKE 1A
Category	Controller
Language	English