Danfoss ICAD 1200B User Manual

Contents
Introduction 4
ICM/ICAD overview 4
Installation 5
Mechanical installation 8
Electrical data 8
Supply voltage 9
Fail safe supply 9
Data communication 9
Analog Input - Current or Voltage 9
Analog Output 10
Digital Input 10
Digital Output 10
Wiring the ICAD actuator 10
Wiring diagram showing ICAD wired to a PLC or other type of third party electronics 11
Wiring diagram showing ICAD wired to a Danfoss EKC/EKE controller 12
Wiring diagram showing ICAD wired to a Danfoss EKE controller 13
Wiring diagram showing ICAD wired with one digital input for ON/OFF solenoid valve
operation 14
Wiring diagram for oating 3-point control (open-neutral-close) 14
Wiring diagram showing ICAD digital outputs wired with customer supplied auxiliary
relays 15
ICAD overview 15
Operation the ICAD menu 15
Power on and start operation 16
Conguration of the ICAD actuator 18
Parameter List 18
Service/Control Parameters 18
Service/Advanced Control Parameters 19
Service/Alarm Conguration Parameters 23
Service/Boost Function Parameters 24
Service/System Parameters 25
Service/Display Parameters 26
Service/Network Parameters, (RS485) 26
Status/I/O Status 27
ICM and ICMTS Motorized Valves with ICAD Actuators
© Danfoss | Climate Solutions | 2024.01 BC465027827472en-000102 | 2

Danfoss ICAD 1200B Specifications

General

Brand	Danfoss
Model	ICAD 1200B
Category	Control Unit
Language	English