4.4 Creating a new setback period
living eco® allows you to create up to three setback periods for each day.
1. 2.
If the display is off, press , then press
again to open theprogramme menu.
Use to select the desired programme.
When the chosen programme is flashing,
press to conrm.
Use to select the desired period - choose
between the weekend, all weekdays or a
single day.
When the chosen day(s) ashes, press to
select.
3. 4.
Start time for the existing setback period is
flashing slowly. Use to move to start time
for the new setback period.
When the start time for the new setback pe-
riod ashes, use to set the time and press
to conrm.
5. 6.
Now the end time flashes. Use to set the
end time and press to conrm.
Now the setback temperature flashes. Use
to set the temperature and press to
conrm.
User Guide living eco® Electronic Radiator Thermostat
To Next Page
Loading...
Need help?
General
