5.5 Setting the Heating Control
1. 2.
If the display is off, press , then press
again and hold for 3 seconds. flashes.
Press both buttons for 3 seconds, use
to select Hc and press to confirm.
3. 4.
1 flashes, indicating moderate heating re-
sponse is selected (recommended for district
heating). Use to shift to 0, press to
confirm.
0 flashes, indicating quick heating response is
selected (recommended for all boilers), press
to confirm.
5.6 Open-window function
living eco® features an Open-window function, which
closes the valve if the room temperature is falling
dramatically, thus reducing the heat loss.
The heat is turned o for up to 30 minutes, before living
eco® returns to its original settings.
When Open-window has been activated, the function is
quarantined for 45 minutes.
Note! Be aware that the Open-window function will be
aected, if curtains or furniture is covering living eco®, thus
preventing it from detecting the decreasing temperature.
User Guide living eco® Electronic Radiator Thermostat
To Next Page
Loading...
Need help?
General
