Danfoss VLT 5000 Series Design Guide

PC Software tools
PC Software - MCT 10
All drives are equipped with a serial communication
port. We provide a PC tool for communication between
PC and frequency converter, VLT Motion Control Tool
MCT 10 Set-up Software.
MCT 10 Set-up Software
MCT 10 has been designed as an easy to use inter-
active tool for setting parameters in our frequency
converters.
The MCT 10 Set-up Software will be useful for:
• Planning a communication network off-line.
MCT 10 contains a complete frequency con-
verter database
• Commissioning frequency converters on line
• Saving settings for all frequency converters
• Replacing a drive in a network
• Expanding an existing network
• Future developed drives will be supported
MCT 10 Set-up Software support Profibus DP-V1 via
a Master class 2 connection. It makes it possible to on
line read/write parameters in a frequency converter via
the Profibus network. This will eliminate the need for
an extra communication network.
The MCT 10 Set-up Software Modules
The following modules are included in the software
package:
MCT 10 Set-up Software
Setting parameters
Copy to and from frequency converters
Documentation and print out of parameter set-
tings incl. diagrams
SyncPos
Creating SyncPos programme
Ordering number:
Please order your CD containing MCT 10 Set-up Soft-
ware using code number 130B1000.
MCT 31
The MCT 31 harmonic calculation PC tool enables
easy estimation of the harmonic distortion in a given
application. Both the harmonic distortion of Danfoss
frequency converters as well as non-Danfoss frequen-
cy converters with different additional harmonic reduc-
tion measurements, such as Danfoss AHF filters and
12-18-pulse rectifiers, can be calculated.
Ordering number:
Please order your CD containing the MCT 31 PC tool
using code number 130B1031.
Modbus RTU
MODBUS RTU (Remote Terminal Unit) Protocol is a
messaging structure developed by Modicon in 1979,
used to establish master-slave/client-server commu-
nication between intelligent devices.
MODBUS is used to monitor and program devices; to
communicate intelligent devices with sensors and in-
struments; to monitor field devices using PCs and
HMIs.
MODBUS is often applied in Gas and Oil applications,
but also in building, infrastructure, transportation and
energy, applications are making use of its benefits.
VLT
®
5000 Design Guide
MG.52.B2.02 - VLT
®
is a registered Danfoss trademark 19
How to select your fre-
quency converter

Danfoss VLT 5000 Series Specifications

General

Brand	Danfoss
Model	VLT 5000 Series
Category	DC Drives
Language	English