VLT
®
6000 HVAC Series
Introduction to
HVAC
■ Introduction to Operating Instructions
These Operating Instructions are a tool intended for persons who are to install, operate and program the
VLT 6000 HVAC.
A VLT 6000 HVAC comes with Operating Instructions as well as Quick Setup Guide. In addition, a Design
Guide can be ordered for use when designing installations that will include a VLT 6000 HVAC. See Available
literature.
Operating Instructions: These are instructions in how to ensure optimum mechanical and
electrical installation, commissioning and service. The Operating
Instructions also include a description of the software parameters,
thereby enabling easy adaptation of the VLT 6000 HVAC to your
application.
Quick Setup Guide: Helps you to quickly install and commission the VLT 6000 HVAC.
Design Guide: Used when designing installations that include a VLT 6000 HVAC. The
Design Guide gives detailed information about VLT 6000 HVAC and
HVAC installations, including a selection tool to enable you to choose
the right VLT 6000 HVAC with its relevant options and modules. The
Design Guide also contains examples of the most common HVAC
applications. Furthermore, the Design Guide has all information relating
to serial communication.
These Operating Instructions are divided into four sections with information about VLT 6000 HVAC.
Introduction to HVAC: This section tells you the advantages you can obtain by using a VLT
6000 HVAC - such as AEO, Automatic Energy Optimization, RFI filters
and other HVAC-relevant functions. This section also contains examples
of application as well as information about Danfoss and CE-labelling.
Installation: This section tells you how to carry out mechanically correct installation
of the VLT 6000 HVAC. In addition, this section includes a description
of how to ensure that the installation of your VLT 6000 HVAC
is EMC-correct. Furthermore, a list is given of mains and motor
connections, together with a description of the control card terminals.
Programming: This section describes the control unit and the software parameters for
the VLT 6000 HVAC. Also included is a guide to the Quick Setup menu,
which allows you to get started on your application very quickly.
All about VLT 6000 HVAC This section gives information about status, warning and error
messages from the VLT 6000 HVAC. Additionally, information is given
on technical data, service, factory settings and special conditions.
Indicat
es a general warning
NB!:
Indicates something to be noted by the reader
Indicat
es a high-voltage warning
MG.61.A5.02 - VLT is a registered Danfoss trademark
7
To Next Page
Loading...
Need help?
General
