Danfoss vlt FC 102 User Guide

Power range N630 N710 N800 N900 N1M0
Drive modules 4 4 4 4 4
Rectier conguration 6-pulse/12-pulse
High/normal load HO NO HO NO HO NO HO NO HO NO
Typical shaft output at 525–550 V [kW] 500 560 560 670 670 750 750 850 850 1000
Typical shaft output at 575 V [hp] 650 750 750 950 950 1050 1050 1150 1150 1350
Typical shaft output at 690 V [kW] 630 710 710 800 800 900 900 1000 1000 1200
Protection rating IP00
Eciency 0.98
Output frequency [Hz] 0–590
Heat sink overtemperature trip [°C (°F)]
110 (230)
Power card ambient trip [°C (°F)]
80 (176)
Output current [A]
Continuous (at 550 V) 659 763 763 889 889 988 988 1108 1108 1317
Intermittent (60 s overload) at 550 V 989 839 1145 978 1334 1087 1482 1219 1662 1449
Continuous (at 575/690 V) 630 730 730 850 850 945 945 1060 1060 1260
Intermittent (60 s overload) at
575/690 V
945 803 1095 935 1275 1040 1418 1166 1590 1590
Continuous (at 550 V) [kVA] 628 727 727 847 847 941 941 1056 1056 1255
Continuous (at 575 V) [kVA] 627 727 727 847 847 941 941 1056 1056 1255
Continuous (at 690 V) [kVA] 753 872 872 1016 1016 1129 1129 1267 1267 1506
Input current [A]
Continuous (at 550 V) 642 743 743 866 866 962 1079 1079 1079 1282
Continuous (at 575 V) 613 711 711 828 828 920 1032 1032 1032 1227
Continuous (at 690 V) 613 711 711 828 828 920 1032 1032 1032 1227
Power losses [W]
Drive modules at 600 V 7469 8683 8668 10166 10163 11406 11292 12852 12835 15762
Drive modules at 690 V 7381 8559 8555 9996 9987 11188 11077 12580 12551 15358
AC busbars at 575 V 637 644 644 653 653 661 661 672 672 695
DC busbars during regeneration 198 198 208 208 218 218 231 231 256 256
Maximum cable size [mm
2
(mcm)]
Mains
1)
4x120 (250) 6x120 (250) 8x120 (250)
Motor 4x120 (250) 6x120 (250) 8x120 (250)
Brake 8x70 (2/0) 8x95 (3/0)
Regeneration terminals 4x150 (300) 6x120 (250) 6x150 (300) 8x120 (250)
Maximum external mains fuses
6-pulse conguration 700 V, 1600 A 700 V, 2000 A
12-pulse conguration 700 V, 900 A 700 V, 1500 A
Table 7.14 FC 302, 525–690 V AC Mains Supply (4-module System)
1) For 12-pulse units, the cables between the star and delta terminals must be equal in number and length.
Specications User Guide
MG37L202 Danfoss A/S © 08/2017 All rights reserved. 67
7 7

Danfoss vlt FC 102 Specifications

General

Brand	Danfoss
Model	vlt FC 102
Category	DC Drives
Language	English