Danfoss VLT Flow Drive FC 111 User Manual

View how many hours the drive has run. The value is saved when the drive is turned off.
Table 265: Range:
Min: 0 h
Max: 2147483647 h
Default value: 0 h
15-01 Running Hours
Default value: 0 h
Parameter type: Range
2-setup: 1 setup
Conversion index: -
Data type: u_int32
Change during operation: True
View how many hours the motor has run. Reset the counter in parameter 15-07 Reset Running Hours Counter. The value is saved
when the drive is turned off.
Table 266: Range:
Min: 0 h
Max: 2147483647 h
Default value: 0 h
15-02 kWh Counter
Default value: 0 kWh
Parameter type: Range
2-setup: 1 setup
Conversion index: -
Data type: u_int32
Change during operation: True
View the output power of the drive in kWh as a mean value over 1 hour. Reset the counter in parameter 15-06 Reset kWh Counter.
Table 267: Range:
Min: 0 kWh
Max: 65535 kWh
Default value: 0 kWh
15-03 Power Up's
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: -
Data type: u_int32
Change during operation: True
View the number of times the drive has been powered up.
Table 268: Range:
Min: 0
Max: 2147483647
Default value: 0
15-04 Over Temp's
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: -
Data type: u_int16
Change during operation: True
View the number of drive temperature faults that have occurred.
Table 269: Range:
Min: 0
Max: 65535
Default value: 0
15-05 Over Volt's
Default value: 0
Parameter type: Range
2-setup: 1 setup
Conversion index: -
Data type: u_int16
Change during operation: True
View the number of drive overvoltages that have occurred.
Table 270: Range:
Min: 0
Max: 65535
Default value: 0
AU363928304090en-000101 / 130R0982 | 139Danfoss A/S © 2021.07
Parameters
VLT® Flow Drive FC 111
Programming Guide

Danfoss VLT Flow Drive FC 111 Specifications

General

Brand	Danfoss
Model	VLT Flow Drive FC 111
Category	DC Drives
Language	English