Danfoss VLT MCD 202 User Manual

Danfoss Drives · DKDD.PB.551.A1.02 | 23
IEC 60529 species protection ratings for enclosures.
The rst number describes the protection against solid objects, the
second number describes the level of protection against entry of
liquids. Example IP 20 is highlighted below.
IP Solids
Liquids
0 No protection No protection.
1
Protected against solid objects
greater than 50 mm (e.g.
accidental touching by hand).
Protected against vertically falling
drops of water (e.g. condensation).
2
Protected against solid objects
greater than 12 mm (e.g. ngers).
Protected against direct sprays of
water up to 15° from vertical.
3
Protected against solid objects
greater than 2.5 mm
(e.g. tools or wires)
Protected against sprays of water
up to 60° from vertical.
4
Protected against solid objects
greater than 1 mm
(e.g. tools and small wires).
Limited protection against water
sprayed from all directions (limited
ingress permitted).
5
Limited protection against dust
(some ingress but no harmful
deposit).
Limited protection against low
pressure jets of water from all direc-
tions (limited ingress permitted).
6 Complete protection against dust.
Protected against strong jets of
water (limited ingress permitted).
7
Protected against the eects of
immersion in water between 15 cm
and 100 cm.
8
Protected against extended
immersion in water under pressure.
IP ratings
Examples
• MCD200-007 ~ MCD200-055 is IP 20
• MCD200-075 ~ MCD200-110 is IP 00
IP 20 with optional finger guard kit,
Order code 175G9007
• MCD5-0021 ~ MCD5-0105 is IP 20
• MCD5-0131 ~ MCD5-1600 is IP 00
Order codes for finger guard kits are:
MCD5-0131~0215: 175G5662
MCD5-0245: 175G5663
MCD5-0360~0927: 175G5664
MCD5-1200~1600: 175G5665
MCD5-0245~0396B: 175G5730
MCD5-0469~0961B: 175G5731

Danfoss VLT MCD 202 Specifications

General

Brand	Danfoss
Model	VLT MCD 202
Category	Controller
Language	English