Danfoss VLT MCD 202 User Manual

56 | Danfoss Drives · DKDD.PB.551.A1.02
This requires an MCD Probus Module which clips onto the side of
the MCD 200 (Cat. No: 175G9001).
Notes:
• A single Probus Module is required for each MCD 200.
• Probus node address is selected using two rotary switches.
Data rate is automatically detected.
• Up to 31 Probus Modules can be used as Probus slaves
on a single Probus DP network.
• The Probus Module requires and external 24 VDC auxiliary supply.
• The MCD Probus Module is Probus tested and certied.
• For more information on the MCD Probus Module, refer to the
Installation Instructions (MG.17.Gx.02) at www.danfoss.com/drives.
MCD200
MCD
Profibus
Module
Standard
DB9
connection
Profibus DP
network cable
Cat. No: 175G9001
MCD 200 Probus Option

Danfoss VLT MCD 202 Specifications

General

Brand	Danfoss
Model	VLT MCD 202
Category	Controller
Language	English