Danfoss VLT MCD 202 User Manual

50 | Danfoss Drives · DKDD.PB.551.A1.02
This requires an MCD PROFIBUS Module which clips onto the side
of the MCD 500 (Cat. No: 175G9001).
Notes:
• A single PROFIBUS Module is required for each MCD 500.
• The PROFIBUS node address is selected using two rotary
switches. Data rate is automatically detected.
• Up to 31 PROFIBUS Modules can be used as PROFIBUS slaves on a
single PROFIBUS DP network.
• The PROFIBUS Module requires an external 24 VDC auxiliary
supply.
• The MCD PROFIBUS Module is PROFIBUS tested and certified.
• For more information on the MCD PROFIBUS Module, refer to the
Installation Instructions (MG.17.Gx.02) at www.danfoss.com/
drives
MCD500
MCD
PROFIBUS
Module
Standard
DB9
connection
PROFIBUS DP
network cable
Cat. No: 175G9001
MCD 500 Probus Option

Danfoss VLT MCD 202 Specifications

General

Brand	Danfoss
Model	VLT MCD 202
Category	Controller
Language	English