Danfoss VLT MCD 202 User Manual

46 | Danfoss Drives · DKDD.PB.551.A1.02
The VLT® LCP 501, Cat. No. 175G0096 ensures seamless plug and
play communication and control of VLT® Soft Starter MCD 500.
Full control and monitoring
The screen view set-up is selected from 7 standard views and one
user programmable.
Language selection:
English, Chinese, German, Spanish, Portuguese, French, Italian,
Russian.
The VLT® LCP 501 is connected to the MCD 500 by using a 3 m cable
using 9 pin (D-sub) plug and 3m cable provided with the IP 65
(NEMA 12) door-mount kit.
Control Panel VLT® LCP 501
• Same user interface as VLT® Soft Starter MCD 500
• Plug & play with MCD 500
• Copy/ paste of parameters
• Multiple monitoring setup
• Door-mount kit – 3 m cable
• IP 65 (NEMA 12)
The MCD LCP 501 (Cat. No: 175G0096) can be connected directly to
the dedicated output on MCD 500 (v10 and later). The LCP 501 can
be mounted up to 3 metres away from the starter, for control and
monitoring. The starter can be controlled and programmed from
either the remote LCP or the LCP on the starter. Both displays show
the same information.
MCD 500 with Control Panel VLT® LCP 501

Danfoss VLT MCD 202 Specifications

General

Brand	Danfoss
Model	VLT MCD 202
Category	Controller
Language	English