Danfoss VLT Micro Drive FC 51 Series Programming Guide

16-12 Motor Voltage
Range: Function:
0.0 * [0.0 - 999.9 V]
View motor phase voltage.
16-13 Frequency
Range: Function:
0.0 Hz * [0.0 - 400.0 Hz]
View output frequency in Hz.
16-14 Motor Current
Range: Function:
0.00 A * [0.00 - 655 A]
View motor phase current.
16-15 Frequency [%]
Range: Function:
0.00 * [-100.00 - 100.00%]
View a two-byte word reporting actual motor frequency as a percentage of par. X-XX
16-18 Motor Thermal
Range: Function:
0% * [0 - 100%]
View calculated thermal motor load as percentage of estimated thermal motor load.
4.13.5. 16-3* Drive Status
Parameters for reporting the status of the frequency converter.
16-30 DC Link Voltage
Range: Function:
0 V * [0 - 10000 V]
View DC-link voltage.
16-34 Heat Sink Temp.
Range: Function:
0 * [0 - 255rC]
View heat sink temperature of frequency converter.
16-35 Inverter Thermal
Range: Function:
0% * [0 - 100%]
View calculated thermal load on frequency converter in relation to estimated thermal load on frequency converter.
16-36 Inv. Nom. Current
Range: Function:
0.00 A * [0.01 - 655A]
View continuous nominal inverter current.
16-37 Inv. Max. Current
Range: Function:
0.00 A * [0.1 - 655A]
View intermittent maximum inverter current (150%).
16-38 SL Controller State
Range: Function:
0 * [0 - 255]
View number of active SLC state.
4.13.6. 16-5* Ref. & Feedb.
Parameters for reporting the reference and feedback input.
4. Parameter Descriptions VLT
p
Micro Drive FC 51
60 MG.02.C4.02 - VLT
p
is a registered Danfoss trademark
4

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English