Danfoss VLT Micro Drive FC 51 Series Programming Guide

16-50 External Reference
Range: Function:
0.0% * [-200.0 - 200.0%]
View sum of all external references in percent.
16-51 Pulse Reference
Range: Function:
0.0 % * [-200.0 - 200.0%]
View actual pulse input converted to a reference in percent.
16-52 Feedback
Range: Function:
0.000 * [-4999.000 - 4999.000]
View analog or pulse feedback in Hz.
4.13.7. 16-6* Inputs and Outputs
Parameters for reporting the digital and analog IO ports.
16-60 Digital Input 18, 19, 27, 33
Range: Function:
0 * [0 - 1111]
View signal states from active digital inputs.
16-61 Digital Input 29
Range: Function:
0 * [0 - 1]
View signal state on digital input 29.
16-62 Analog Input 53 (volt)
Range: Function:
0.00 * [0.00 - 10.00 V]
View input voltage on analog input terminal.
16-63 Analog Input 53 (current)
Range: Function:
0.00 * [0.00 - 20.00 mA]
View input current on analog input terminal.
16-64 Analog Input 60
Range: Function:
0.00 * [0.00 - 20.00 mA]
View actual value at input 60 either as reference or protection value.
16-65 Analog Output 42 [mA]
Range: Function:
0.00 mA * [0.00 - 20.00 mA]
View output current on analog output 42.
16-68 Pulse Input
Range: Function:
20 Hz * [20 - 5000 Hz]
View input frequency on pulse input terminal.
16-71 Relay Output [bin]
Range: Function:
0 * [0 - 1]
View relay setting.
16-72 Counter A
Range: Function:
0 * [-32768 - 32767]
View present value of Counter A.
VLT
p
Micro Drive FC 51 4. Parameter Descriptions
MG.02.C4.02 - VLT
p
is a registered Danfoss trademark 61
4

Danfoss VLT Micro Drive FC 51 Series Specifications

General

Brand	Danfoss
Model	VLT Micro Drive FC 51 Series
Category	Media Converter
Language	English