Danfoss VLTAutomationDrive FC 360 User Manual

2.2 Product Overview
A frequency converter is an electronic motor controller
that converts AC mains input into a variable AC waveform
output. The frequency and voltage of the output are
regulated to control the motor speed or torque. The
frequency converter can vary the speed of the motor in
response to system feedback, such as changing
temperature or pressure for controlling fan, compressor, or
pump motors. The frequency converter can also regulate
the motor by responding to remote commands from
external controllers.
In addition, the frequency converter monitors the system
and motor status, issues warnings or alarms for fault
conditions, starts and stops the motor, optimizes energy
efficiency, and offers many more control, monitoring, and
efficiency functions. Operation and monitoring functions
are available as status indications to an outside control
system or serial communication network.
2.3 Additional Resources
Other resources are available to understand advanced
frequency converter functions and programming.
•
The Programming Guide provides greater detail
on working with parameters.
•
The Design Guide is intended to provide detailed
capabilities and functionality to design motor
control systems.
•
Optional equipment is available that may change
some of the procedures described. Be sure to see
the instructions supplied with those options for
specific requirements.
Contact the local Danfoss supplier or go to
http://www.danfoss.com/Products/Literature/VLT+Technical
+Documentation.htm for downloads.
2.4 Frame Sizes and Power Ratings
Frame size
380-480 V
J1 J2 J3 J4 J5 J6 J7
Power size [kW] 0.37-2.2 3.0-5.5 7.5 11-15 18.5-22 30-45 55-75
Dimensions
[mm]
A
a
D
C
B
b
130BC449.10
Height A 210 272.5 272.5 317.5 410 520 550
Width B 75 90 115 133 150 233 308
Depth C
(with option B)
168 (181) 168 (181) 168 (181) 245 (258) 245 (258) 242 332
Mounting holes
a 198 260 260 297.5 390
b 60 70 90 105 120
Mounting screw M4 M5 M5 M6 M6
Table 2.2 Frames Sizes, Power Ratings and Dimensions
Introduction
VLT
®
AutomationDrive FC 360 Quick Guide
MG06A102 - VLT
®
is a registered Danfoss trademark 9
2
2

Danfoss VLTAutomationDrive FC 360 Specifications

General

Brand	Danfoss
Model	VLTAutomationDrive FC 360
Category	Controller
Language	English