DataCard SD260L Installation And Administrator's Guide

A-16 SD460 Laminating System
b. Select the print and lamination options you want to test, and then click Run to print a
test card. You also can select to debow the test card, and impress the card if an impresser
is installed.
Verify the Test Card
Examine the test cards to verify the following.
 The overlays are being applied properly:
 Each overlay is applied completely to the card.
 The material adheres well to the edges of the card.
 The overlay does not come off when the card is bent or twisted.
 The card is debowed correctly.
 The impression is positioned correctly and has the proper depth.
If you need to adjust the laminator settings, refer to the following Printer Manager sections:
“Laminator” on page 66 and “LaminateType” on page 73.

DataCard SD260L Specifications

General

Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC
Card feeder	Yes
Duplex printing	No
Print technology	Dye-sublimation/Resin Thermal transfer
Maximum resolution	300 x 300 DPI
Print speed (color)	830 card/h
Print speed (monochrome)	200 card/h
Display	LCD
Product color	Blue, Grey
Internal memory	128 MB
Cable lock slot type	Kensington
Total input capacity	100 sheets
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
USB version	2.0
Ethernet interface type	Fast Ethernet
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	539 mm
Width	175 mm
Height	224 mm
Weight	5400 g