EasyManuals Logo
Home>DataCard>Printer>SD260L

DataCard SD260L Installation And Administrator's Guide

DataCard SD260L
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
24 Elements of Card Design
Print Bar Codes
Bar code design follows a set of standards based on the type of bar code produced. Bar codes
contain a series of black lines (bars) separated by white areas (spaces). Each character of encoded
data is represented by a set of bars and spaces. A bar code standard specifies the number and
width of bars and spaces needed to encode a character. The standard also specifies the minimum
size of the white area, or quiet zone, that surrounds the bar code.
Bar Code Guidelines
Bar codes print more successfully when you observe the following guidelines. Follow the
standards for the type of bar code you are printing.
Bar Code Placement
 Maintain the required quiet zone around the actual bar
code, as shown in the illustration.
 Locate bar codes at least 0.25 inch (6.3 mm) from other
printing and from the edge of the card.
 For best results, orient the card so that the bars are parallel
to the long edges of the card, as shown. This orientation
most accurately prints readable bar codes.
Refer to “Print Bar Codes With the Card Printer Driveron page 26 for information
about how to use the Card Printer Driver to improve the probability that a bar code
prints using the K panel.
0.25 in
6.3 mm
quiet zone

Table of Contents

Other manuals for DataCard SD260L

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DataCard SD260L and is the answer not in the manual?

DataCard SD260L Specifications

General IconGeneral
Card size85.6 x 53.98 mm
Card typesMagnetic stripe (ISO 7811), PVC
Card feederYes
Duplex printingNo
Print technologyDye-sublimation/Resin Thermal transfer
Maximum resolution300 x 300 DPI
Print speed (color)830 card/h
Print speed (monochrome)200 card/h
DisplayLCD
Product colorBlue, Grey
Internal memory128 MB
Cable lock slot typeKensington
Total input capacity100 sheets
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-15 - 60 °C
Operating temperature (T-T)15 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
USB version2.0
Ethernet interface typeFast Ethernet
Windows operating systems supportedWindows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64
Weight and Dimensions IconWeight and Dimensions
Depth539 mm
Width175 mm
Height224 mm
Weight5400 g

Related product manuals