DataCard SD260L Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 77
Set Job Queue State
Enter or select values prior to shipping the printer or system to or from repair facilities.
1. Enter the current password for the printer or system.
2. Enter a new password for the printer or system.
3. Re-enter the new password for verification.
4. Select a state:
 Online—The printer performs normally.
 Suspend—Deactivates the printer, but allows for some exception jobs.
 Offline—Deactivates the printer for transportation.
5. Click Set Job Queue State to apply the changes.
This setting is used primarily for financial printers. Contact your service provider
for more information.
Field Value Description
Current Password Enter the currently set password.
Leave the field blank if no password
was previously set.
Next Password Enter a new password. A blank value
means that no password is required or
leaves the current password
unchanged, depending on the
settings.
Confirm Next Password Retype the Next Password.
State Online
Suspend
Offline
StartJob succeeds if there is space in
the queue.
StartJob succeeds if there is space in
the queue and exceptionJob=true.
StartJob does not succeed under any
circumstances.
To re-enable an “Offline” printer and set it back to “Online,” you must enter the same
password that was used to set it to “Offline.”

DataCard SD260L Specifications

General

Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC
Card feeder	Yes
Duplex printing	No
Print technology	Dye-sublimation/Resin Thermal transfer
Maximum resolution	300 x 300 DPI
Print speed (color)	830 card/h
Print speed (monochrome)	200 card/h
Display	LCD
Product color	Blue, Grey
Internal memory	128 MB
Cable lock slot type	Kensington
Total input capacity	100 sheets
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
USB version	2.0
Ethernet interface type	Fast Ethernet
Windows operating systems supported	Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64

Weight and Dimensions

Depth	539 mm
Width	175 mm
Height	224 mm
Weight	5400 g