SD260L/SD360/SD460 Installation and Administrator’s Guide 45
Print Set print parameters for
color management, print
intensity, and registration
settings.
No Change all
Current Values
Pick Display and set pick values.
Available to WebService
access level users only.
No No
Transport Set the eject speed of the
hopper and the transport
motor speed.
View only
TransMedSpeed
View only:
TransMedSpeed;
Change:
EjectHopper
Speed
Flipper Set values for the duplex
module in duplex-option
printers. Available to
WebService access level
users only.
No No
MagStripeGeneral Set magnetic stripe options
including coercivity, custom
magnetic stripe formats, and
data formats.
No Change coercivity,
custom formats,
and data formats
MagStripeCustomTrack1 Set customized magnetic
stripe values for track 1.
No Change all
Current Values
MagStripeCustomTrack2 Set customized magnetic
stripe values for track 2.
No Change all
Current Values
MagStripeCustomTrack3 Set customized magnetic
stripe values for track 3.
No Change all
Current Values
Laminator Specify laminator settings Change all Current
Values
Change all
Current Values
LaminateType Specify overlay settings Change all Current
Values
Change all
Current Values
Printer Setting Menu
Option Function WebUser WebAdmin