IBM Features
Product Reference Guide 119
IBM Label Slicing Control
Enables/disables the slicing of IBM-46XX host transmission data into
multiple pieces when a label is longer than the length specified by
IBM
Maximum Label Slice Length
.
Options are:
• Disable Label Slicing — Send data to host in one piece.
• Enable Label Slicing — Slice the host data into multiple pieces
when necessary.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan your selection from the bar codes below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
IBM LABEL SLICING CONTROL = DISABLE LABEL SLICING
IBM LABEL SLICING CONTROL = ENABLE LABEL SLICING
To Next Page
Loading...
Need help?
General
