304 Magellan
®
2200VS/2200VS and 2300HS/2300HS
Code 128 Enable
Enables/disables
1
the ability of the scanner to decode Code 128 labels.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
CODE 128 = DISABLE
CODE 128 = ENABLE
1. Exception: The Code 128 symbology is always enabled with regard to scanning/reading the spe-
cial C128 programming bar codes provided in this manual.
To Next Page
Loading...
Need help?
General
