216 Magellan
®
2200VS/2200VS and 2300HS/2300HS
EAN-8/JAN-8 Guard Insertion
Enables/Disables the ability of the scanner to insert a guard pattern into
an otherwise complete EAN-8 segment it has received.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
EAN-8/JAN-8 GUARD INSERTION = DISABLE
EAN-8/JAN-8 GUARD INSERTION = ENABLE
To Next Page
Loading...
Need help?
General
