To Next Page

To Previous Page

318 Magellan

2200VS/2200VS and 2300HS/2300HS

I 2 of 5 Check Character Calculation

Enables/disables calculation and verification of an optional Interleaved 2

of 5 check character.

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You’ll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

bar code.

I 2 of 5 CHECK CHARACTER CALCULATION = DISABLE

I 2 of 5 CHECK CHARACTER CALCULATION = ENABLE

NOTE

If check character calculation is disabled, the risk is increased that a

misread can occur. When disabled, any check characters in a bar code

are treated as data characters.

Datalogic Magellan 2200VSΩ User Manual

Other manuals for Datalogic Magellan 2200VSΩ