DataBar Expanded Enable
Product Reference Guide 279
DataBar Expanded EAN-128 Emulation
Enables/disables EAN-128 emulation for DataBar Expanded.
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You’ll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
DataBar Expanded/EAN-128 EMULATION = DISABLE
DataBar Expanded/EAN-128 EMULATION = ENABLE
To Next Page
Loading...
Need help?
General
