Datalogic PowerScan PD9530 Quick Reference Guide

Using the PowerScan™ PD9530
8 PowerScan™ PD9530
Using the PowerScan™ PD9530
The PowerScan™ PD9530 normally functions by capturing
and decoding bar codes. The reader is equipped with an inter-
nal motion-sensing function which activates the aiming sys-
tem on device motion. The intelligent aiming system indicates
the field of view which should be positioned over the bar code:
Table 1. Aiming System
The field of view indicated by the aiming system will be small-
er when the reader is closer to the bar code and larger when it
is farther from the code. Symbologies with smaller bars or el-
ements (mil size) should be read closer to the unit. Symbolo-
gies with larger bars or elements (mil size) should be read
farther from the unit.
If the entire bar code is within the aiming field, you will get a
good read. Successful reading is signaled by an audible tone
plus a good-read green spot LED indicator.
Reference the PowerScan PD9530 Product Reference Guide
(PRG) for more information about this feature and other pro-
grammable settings.
Model P/N Aimer pattern
PD9530 /
PD9530-DPM
PD9539-HP /
PD9530-HPE

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g