Datalogic PowerScan PD9530 Quick Reference Guide

Error Codes
Quick Reference Guide 29
Error Codes
Upon startup, if the reader sounds a long tone, this means the
reader has not passed its automatic Selftest and has entered
FRU (Field Replaceable Unit) isolation mode. If the reader is
reset, the sequence will be repeated. Press and release the trig-
ger to hear the FRU indication code.
The following table describes the LED flashes/beep codes as-
sociated with an error found.
Label Program-
ming Mode Can-
cel Item Entry
Cancel label has been
scanned.
N/A
Reader sounds
two times at low
frequency and
current volume.
Number of
LED Flashes/
Beeps
Error Corrective Action
1 Configuration
Contact Helpdesk for
assistance
2Interface PCB
6Digital PCB
11 Imager

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g