Datalogic PowerScan PD9530 Quick Reference Guide

Operating Modes
Quick Reference Guide 23
Pick Mode
Specifies the ability of the reader to decode labels only when
they are close to the center of the aiming pattern. Pick Mode
is a Decoding and Transmission process where bar codes that
are not within the configurable distance from the center of the
aiming pattern are not acknowledged or transmitted to the
host. It is active only while the scanner is in Trigger Single
mode. If the scanner switches to a different Read Mode, Pick
Mode is automatically disabled.
Multiple Label Reading
The reader offers a number of options for multiple label read-
ing. See the PRG or software configuration tool for descrip-
tions of these features and programming labels.
This feature is not compatible with Multiple Labels
Reading in a Volume. See the PRG for more infor-
mation.
ENTER/EXIT PROGRAMMING MODE
 PIck Mode = Disable
Pick Mode = Enable

Datalogic PowerScan PD9530 Specifications

General

Type	Handheld bar code reader
Sensor type	Laser
Tilt reading angle	0 - 360 °
Pitch reading angle	-40 - 40 °
Linear (1D) barcodes supported	-
Standard interfaces	RS-232, USB, Keyboard wedge
Connectivity technology	Wired
Product color	Black, Yellow
International Protection (IP) code	IP65
Input voltage	5 V
Power consumption	350 mA
Power source type	DC
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Cables included	No

Weight and Dimensions

Depth	110 mm
Width	74 mm
Height	212 mm
Weight	330 g