Datalogic PowerScan PM96 Series User Manual (English)

Questions and Answers:

K
Kimberly MooreAug 8, 2025
What to do if Datalogic Barcode Reader LED is on but barcode doesn't decode?
- T
  Tara MurphyAug 8, 2025
  If the LED is on, but the bar code doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct bar code type. In this case, ensure the reader is programmed to read the type of bar code scanned. * The bar code label may be unreadable. Check the label to ensure it is not defaced. You can also try scanning another bar code type. * The distance between the reader and the bar code might be incorrect. Try moving the reader closer to or further from the bar code.
J
Joseph CaldwellAug 13, 2025
Why Datalogic Barcode Reader does nothing when I pull the scan button?
- W
  William LittleAug 13, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, the issue might be due to: * No power to the reader. Check the system power and ensure the power supply is connected. * Loose interface or power cables. Make sure all cable connections are secure.
Z
Zoe ZunigaAug 17, 2025
What to do if Datalogic Barcode Reader LED is on but barcode won't decode?
- J
  Joseph VelasquezAug 18, 2025
  If the LED is on but the barcode doesn't decode, it could be due to several reasons: * The reader might not be programmed for the correct barcode type. Ensure the reader is programmed to read the type of barcode you are scanning. * The barcode label may be unreadable. Check the label to ensure it is not damaged. You can also try scanning another barcode. * The distance between the reader and the barcode might be incorrect. Try moving the reader closer to or further away from the barcode.
A
Andrea RomeroAug 23, 2025
Why Datalogic Barcode Reader doesn't work when I pull the scan button?
- J
  Jennifer GonzalezAug 23, 2025
  If nothing happens when you pull the scan button on your Datalogic Barcode Reader, it could be due to the following reasons: * There may be no power to the reader. Check the system power and ensure the power supply is connected. * The interface or power cables might be loose. Ensure all cable connections are secure.

Datalogic PowerScan PM96 Series Specifications

General

IP Protection	IP65
Type	Handheld Barcode Scanner
Connectivity	Bluetooth
Operating Temperature	50°C
Battery	Lithium-Ion, 3250 mAh
Supported Barcodes	QR Code, Data Matrix
Humidity	95% (non-condensing)
Power Supply	5 VDC
Decode Capability	1D and 2D barcodes