Datalogic PowerScan PM96 Series User Manual

SETUP
22 POWERSCAN™ PD/PM96XX
Disconnecting BC9630 cables
To disconnect the cables, power off the base station, unlock the lever and press down
the cable clip using a pen or a similar tool.
1. Power off the cradle and unlock the lever
2. Press down the cable clip using a pen or a similar tool.
3. Pull out the multi-interface cable and put the lever back into lock position.
Unlock the lever
Press down
the cable clip
Cable
clip
Lock Position

Datalogic PowerScan PM96 Series Specifications

General

Brand	Datalogic
Model	PowerScan PM96 Series
Category	Barcode Reader
Language	English