Name: Dell G16 7630
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Steps

1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest and keyboard assembly

NOTE:

If the rubber grommets are pushed out of the speakers when removing the speakers, push them back in place

before replacing the speakers.

2. Connect the speaker cable to the ethernet and audio board.

3. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Rear cover

Removing the rear cover

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

About this task

The following image indicates the location of the rear cover and provides a visual representation of the removal procedure.

Removing and installing Customer Replaceable Units (CRUs)

Questions and Answers:

Need help?

Do you have a question about the Dell G16 7630 and is the answer not in the manual?

Dell G16 7630 Specifications

General