Name: Dell G16 7630
Brand: Dell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Steps

1. In the System BIOS or System Setup screen, select System Security and press Enter.

The System Security screen is displayed.

2. In the System Security screen, verify that Password Status is Unlocked.

3. Select System Password, update, or delete the existing system password, and press Enter or Tab.

4. Select Setup Password, update, or delete the existing setup password, and press Enter or Tab.

NOTE: If you change the System and/or Setup password, reenter the new password when prompted. If you delete the

System and/or Setup password, confirm the deletion when prompted.

5. Press Esc and a message prompts you to save the changes.

6. Press Y to save the changes and exit from System Setup.

The computer restarts.

Clearing CMOS settings

About this task

CAUTION: Clearing CMOS settings will reset the BIOS settings on your computer.

Steps

1. Remove the base cover.

2. Disconnect the battery cable from the system board.

3. Wait for one minute.

4. Connect the battery cable to the system board.

5. Replace the base cover.

Clearing BIOS (System Setup) and System passwords

About this task

To clear the system or BIOS passwords, contact Dell technical support as described at www.dell.com/contactdell.

NOTE:

For information on how to reset Windows or application passwords, refer to the documentation accompanying

Windows or your application.

BIOS setup 95

Questions and Answers:

Need help?

Do you have a question about the Dell G16 7630 and is the answer not in the manual?

Dell G16 7630 Specifications

General