Menu item Description
N-up Border
None
Solid
Prints a border around each page image when using N-up (pages-sides)
Note: None is the factory default setting.
Quality menu
Menu item Description
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 IQ
2400 IQ
Specifies the printed output resolution
Note: 600 dpi is the factory default setting.
Toner Darkness
1–10
Lightens or darkens the printed output
Notes:
• 8 is the factory default setting.
• Selecting a smaller number can help conserve toner.
Enhance Fine Lines
On
Off
Enables a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts
Notes:
• Off is the factory default setting.
• To set Enhance Fine Lines, with a document open, click File Print, and then
click Properties, Preferences, Options, or Setup for Windows users. For
Macintosh users, choose File> Print, and then adjust the settings from the print
dialog and pop-up menus.
Gray Correction
Auto
Off
Choose whether to apply Gray Correction on printed gray images. The Auto setting
automatically applies Gray Correction, and Off does not.
Note: Off is the factory default setting.
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Choose whether to make characters more distinct and definite. Pixel Boost may be
needed when using certain fonts.
Note: Off is the factory default setting.
Brightness
-6–6
Adjusts or darkens printed output and conserves toner
Note: 0 is the factory default setting.
Contrast
0–5
Adjusts the contrast of printed objects
Note: 0 is the factory default setting.
Understanding the printer menus
29
To Next Page
Loading...
Need help?
General