Back to Contents Page
Coin-Cell Battery
Dell™Latitude™D410ServiceManual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Turn over the computer, loosen the two captive screws from the coin-cell battery cover, and lift the cover away from the computer.
3. Gently pull the coin-cell battery from the system board, and disconnect the cable connector from the system board.
4. Remove the double-sided tape from the battery.
5. Place the double-sided tape on the replacement coin-cell battery.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.