Dell P24T User Manual

Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the I/O-board cable into the connector on the I/O board and close the
latch to secure the cable.
2 Slide the ports on the I/O board into the slots on the base cover and snap the
I/O board into place.
3 Align the screw hole on the I/O board with the screw hole on the base cover
and replace the screw.
4 Slide the I/O-board cable into the connector on the system board and close the
latch to secure the cable.
Post-requisites
1 Replace the battery.
2 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
28

Dell P24T Specifications

General

Brand	Dell
Model	P24T
Category	Laptop
Language	English