Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Adhere the coin-cell battery to the palm rest and keyboard assembly.
2 Route the coin-cell battery cable through the routing guide on the speaker.
3 Connect the coin-cell battery cable to the system board.
Post-requisites
1 Replace the wireless card.
2 Follow the step 4 procedure in “Replacing the I/O board”.
3 Replace the battery.
4 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
50
To Next Page
Loading...
Need help?
General
