Replacing the display panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Slide the display cable into the connector on the display panel and close the latch
to secure the cable.
2 Adhere the adhesive tape to the display cable.
3 Align the screw holes on the display panel with the screw holes on the display
back-cover and antenna assembly.
4 Replace the screws that secure the display panel to the display back-cover and
antenna assembly.
Post-requisites
1 Replace the display bezel.
2 Replace the display assembly.
3 Replace the wireless card.
4 Replace the battery.
5 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
79