Removing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 6 in “Removing the base cover”.
2 Remove the battery.
3 Remove the wireless card.
4 Remove the display hinges.
5 Remove the display bezel.
6 Remove the display panel.
Procedure
CAUTION: Place the display-panel assembly on a soft and clean surface to
avoid scratching the display.
1 Using a plastic scribe, gently pry the camera from the display back-cover and
antenna assembly.
80
To Next Page
Loading...
Need help?
General
