Replacing the display bezel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the display bezel with the display back-cover and antenna assembly, and
gently snap the display bezel into place.
2 Replace hinge caps on the display hinges and snap them into place.
Post-requisites
1 Replace the display assembly.
2 Replace the wireless card.
3 Replace the battery.
4 Follow the procedure from step 2 to step 5 in “Replacing the base cover”.
72
To Next Page
Loading...
Need help?
General
