7
System setup options
NOTE: Depending on the computer and its installed devices, the items listed in this section may or
may not appear.
General screen options
This section lists the primary hardware features of your computer.
Option Description
System
Information
This section lists the primary hardware features of your computer.
• System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership
Tag, Ownership Date, Manufacture Date, and the Express Service Code.
• Memory Information: Displays Memory Installed, Memory Available, Memory
Speed, Memory Channels Mode, Memory technology
• Processor Information: Displays Processor Type, Core Count, Processor ID,
Current Clock Speed, Minimum Clock Speed, Maximum Clock Speed,
Processor L2 Cache, Processor L3 Cache, HT Capable, and 64-bit technology.
• Device Information: SATA-0, M.2 PCIe SSD-0, Video Controller, Video BIOS
Version, Video Memory, Panel Type, Native Resolution, Audio Controller, WiFi
Device, WiGig Device, Cellular Device, Bluetooth Device.
Battery
Information
Displays the battery status and the type of AC adapter connected to the computer.
Boot Sequence Allows you to change the order in which the computer attempts to find an
operating system.
• Windows Boot Manager or UEFI
• Legacy or UEFI
Boot Options This option allows you the legacy option ROMs to load. By default, the Enable UEFI
Network Stack is disabled.
Date/Time Allows you to change the date and time.
System Configuration screen options
Option Description
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
• Disabled
71
To Next Page
Loading...
Need help?
General
