Replacing the base cover
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1. Connect the battery cable to the system board, if applicable.
2. Align the tabs on the base cover with the slots on the palm-rest assembly and snap the base cover to the palm-rest
assembly.
7
18 Replacing the base cover
To Next Page
Loading...
Need help?
General
